Looking for more info?
We have put together a new and
much improved Infopack information CD - Version 5.1
Due to increased demand, we are now mass
producing all NT Infopack CDs. The new printed CDs are of the highest
quality and look great! - Thank
you for your continued support!
The
NT Infopack CD does not contain plans or instructions. It is an extension of the nyethermodynamics.com
website and is divided into 8 sections that contain
a variety of CAD drawings, high-res. photos,
.pdfs, video and other information that is not available on the web. (some of the
files are very large)
The CD is designed to "autorun" and load in your web browser for easy
viewing. The NT Infopack runs totally from the CD, no installation is required.
The NT Infopack CD is totally safe
to run on your computer and contains no active content (other than the JetSpecs
Designer program.)
Warning: Some of this stuff can be dangerous (deadly). We are in no
way suggesting that anyone should use this information to build a turbine engine
or anything else shown here. The NT Infopack CD is supplied as-is without warranty of any kind
and is intended to be used for entertainment only.
Here's what you get...
The NT Infopack now includes JetSpecs Designer 2.0.
This neat
program allows the user to try different engine parameters and see theoretical
results. The designer section suggests dimensions and
combustor hole patterns based upon user input. This program can be very helpful
for turbo turbine design and development.
Note Mar 2008 - we used JetSpecs to help design the combustor
liner for the J07-NT-XX project, and it works great!
Section 1 - NT/1
Turbojet
High-res. Photos
(.jpg)
NT/1 combustor details.
2D
CAD drawing. (AutoCAD R12 .dxf, R14 .dwg and Adobe .pdf)
Combustor Assy.

Section 2 - NT/3
Turbojet
High-res. Photos
(.jpg)
NT/3 set-up & running
Section 3 - NT/4
Turbojet
High-res. Photos
(.jpg)
NT/4 set-up details
Videos (mpeg)
Detail close-ups with narration.
NT/4 start-up, run, thrust demonstration etc.
Section 4 - NT/5 Turbocharger
Turbine
Section 1 contains all the information from our original
NT/5 infopack.

2D
CAD drawings. (AutoCAD R12 .dxf, R14 .dwg and Adobe .pdf)
Combustor Assembly.
Inducer ring.
Exducer connector.
Apu
Lots more...
3D Solid Model
CAD drawings. (AutoCAD R12 .dxf R14 .dwg and Adobe .pdf)
Combustor Assy.
Turbocharger
Fiber-Optic Probe
Engine Mount / Thrust Measuring Sub-System
Load cell
Inducer Assy.
Jet-pipe & Exhaust Nozzle
Engine Test Stand
Instrument Panel
Oil Tank
High-res. Photos
(.jpg)
NT/5 set-up and component details.
NT/5 thrust system calibration.
Afterburner detail shots.
Afterburner flame holder and fuel injector.
Afterburner fuel system.
Afterburner hot-streak ignition system.
Free turbine mounting adapter detail shots.
Free turbine installed.
Tons more...
Word Documents.
(.txt, MS Word and Adobe .pdf)
Field notes with results of changes made during testing.
Proposed gearbox specifications with make and model numbers.
Videos (mpeg)
NT/5 test run including turbine failure.
After-Burner close-up shots.
After-Burner test runs.
After-Burner fuel system close-ups.
Free Turbine close-ups.
Section 5 -
NT/6 Wood Burning Turbine
Field
notes: ( MS Word and Adobe .pdf)
G12 Turbo details.
NT/6 Run-up.
Turbo details.
2D
CAD drawings: ( AutoCAD R12 .dxf, R14 .dwg and Adobe .pdf)
Combustor Assy. (Inner and outer liners)
Turbo adapter.
Flame cutting templates.
High-res. Photos:
Lubrication & cooling system.
Combustor.
Gas Producer.
Throttle valve.
More...
Section 6 - The Hornet
Project
Videos (mpeg)
Detail close-ups with narration.
Hornet in operation.
Lots of High-res. Photos
including detail close-ups of:
Fuel System.
Combustor.
"YF-22" Nozzle.
Throttle Valve.
Compressor.
More...
Section 7 - Squirt 1 Turbine
Jetboat
2D
CAD drawings. ( AutoCAD R12 .dxf, R14 .dwg and Adobe .pdf)
Allison T63 turbine layout.
Motor Mounts.
Inducer flange.
Power take-off shaft and brake components. (Proper detail
shop drawings with full spline details etc.)
T63 to Powerglide transmission drawings for converting a
car to turbine power.
More...
Tons of High-res. Photos
(.jpg)
Lots of photos of every component from various angles.
Word Documents.
(.txt, MS Word and Adobe .pdf)
Field notes with results of various fuel and water
injection tests.
Spreadsheets.
(.txt, Excel97 and Adobe .pdf)
Fuel
tests.
Water injection
tests.
Schematics
(.jpg)
Electrical schematic scans.
Engine and pump
scans.
Videos (mpeg)
Detail close-ups with narration.
Squirt 1 in action. (long, high-res. version.)
Section 8 - Squirt 2 Turbine
Jetboat
2D
CAD drawings. ( AutoCAD R12 .dxf, R14 .dwg and Adobe .pdf)
T58-GE-8F turbine layout.
Lycoming T53L13B turbine Layout.
Various turbine and gearbox layout proposals.
Squirt 2 general arrangement.
High-res. Photos
(.jpg format)
Videos: High resolution (Full
Screen)

New NT Infopack CDs ready to ship.
The NT Infopack makes a great gift!
Ordering: (world-wide) Only $24.95 - Cheap!
We now use

Ordering the NT Infopack Version 5.1 CD-ROM is
easy, especially now that we've hooked up with PayPal. They take all
major credit cards
and do everything over a secure server. It only takes a minute to create an
account even if you have never used PayPal before. They are a reputable company and
we have never had a problem.
To order by PayPal: Click the Buy Now button below...
Or
To order by mail: Send a personal check,
bank draft or money
order for $24.95US + $3.50US (shipping and handling) = $28.45US to:
NT Infopack
3585 Mavis Rd.
Mississauga, ON
Canada
L5C 1T7
Make your check payable to Nye
Thermodynamics Corporation. Don't forget to include your
return address.
Or
To order by Credit Card: Call our office:
905 897 2311 between 8:00am - 5:00pm Monday to Friday Toronto / New York
Time (GMT-5). Tell the operator you wish to place a Credit Card order for an NT
Infpack CD for $28.45US. We will take your Visa or Master Card and shipping
information over the phone and charge $24.95US + $3.50US (shipping and handling)
= $28.45US to your card.

All NT Infopacks ship by Canada Post and usually arrive within
about one week. (please allow up to 3 weeks for overseas shipments)
For customer service, e-mail:
or call 905 897 2311 8:00am - 5:00pm Monday to Friday Toronto / New
York Time (GMT-5)

|